Detailed Product Description

Feature:

CMP110 solar charge controller is controlled by CPU, According to the voltage of the battery, controller will adjust the charge current and decide if to supply the loads electricity. The following is the detailed performance:

·Generally keep the battery on full condition.

·Prevent the battery from overcharge.

·Prevent the battery from overdischarg.

·Prevent supplying electricity from the battery to solar panels during nights.

·Reverse Polarity Protection for Battery

·Reverse Polarity Protection for Solar panels

·When the current of load exceeds the rated one, the controller will turn into the self-protection state and it is automatically locked up, the screen shows Overload.

·Short Circuit happens; the Controller will turn into the self-protection state and is locked up, the screen show Short circuit.

·Low voltage happens to battery, the controller will automatically cut loads from system. When the voltage of battery goes up, the loads will automatically restart to work.

·Protection from the lightning strike

·When Controller is normally working, the LCD Screen will show New Charging Current (a dash-before the numeral), Discharging Current and Voltage of battery every 5 seconds.

·Controller is long-term accumulate the Charge Ampere-hour and Discharge Ampere-hour of the Battery

·When controller start up, according to the voltage level of battery, Controller will automatic-setup the Charging-off voltage, the Load-off voltage, the Load-on voltage. These data is defaulted under the standard environment temperature 25.

·According to varies system temperature, the controller will automatically compensate the temperature of the charging voltage.

·Users could setup the Charge-on or charge-off voltage, the load-off voltage, the Load-on voltage, etc, according to their requirements.

·To prevent battery from over discharging, Controller will automatically control the lowest Load-off voltage, which is no less than 40V. If voltage of the battery is less than 40V, the button - key will no work.

·To recover its defaults, please long press down the button Menu for over 5 seconds.

Technical datum:

environmental temperature  : < 25