Detailed Product Description

Fitting for the solar lighting system is automatically controlled below 180W (12V) or below 360W (24V) for both lighting and solar panel. It uses the newest patent products of ours.

Function

1. Preventing the battery from overcharging,

over discharging and Reverse-Current during

nights.

2. The controller will start up the lighting system

in the evening automatically according to the intensity of the light.

3. Controller will shut down the lighting system

according to the time setting or shut down the lighting system automatically when it is dawn.

Connection

Open the top cover of the controller, connect the wire with the terminal according to the drawing on the top cover of the controller.

1. Connect the + and Poles of the battery to the relevant terminal of the controller (the third one and the fourth one from the left) firmly and correctly.

2. Connect the + and Poles of the solar panel to the relevant terminal of the controller (the first one and the second one from the left) firmly and correctly.

3. Connect the + and Poles of the load to the relevant terminal of the controller (the fifth one and the sixth one from the left) firmly and correctly. 

Indicators

1.One piece of Charge Indicator LED (mark: Charge). When it is

bright, the battery is charged by the solar panel strongly, blinking

means floating charge, no light means stop charging..

2.One piece of Load Indicator LED (mark: Load). When it is bright,

there is an output and the load is working. No light means there is

not the output and the load stop working.